TERMS OF REFERENCE (ToRs) for various positions:

Company Profile

K&G Engineering and Services is a Malawi-based engineering and construction company specializing in petroleum infrastructure, civil works, mechanical fabrication, and electrical installations. The company delivers professional services in fuel pump installation and maintenance, storage tank systems, pipework, civil construction, workshop fabrication, and integrated mechanical and electrical solutions.

With nationwide operational capability, K&G Engineering and Services supports fuel stations, construction projects, and industrial operations across Malawi. The company is committed to high standards of quality workmanship, operational efficiency, and strict compliance with Health, Safety, Security, and Environmental (HSSE) regulations.

To support its continued growth and expanding project portfolio, K&G Engineering and Services is inviting applications from suitably qualified and experienced candidates to fill the following positions:

• Safety Officer
• Electrical Technician – Petroleum (Pumps & Tanks)
• Electronics Technician – Petroleum (Pump Systems Support)
• Welding and Fabrication Workshop Technician (2 positions)
• Foreman
• Light Cargo Vehicle Driver

Qualified candidates who meet the specified requirements are encouraged to apply.

Position: 1. Safety Officer

1. General Information

Recruiting Organization: K&G Engineering and Services

Duty Station: Chileka, Blantyre, Malawi

Position Title: Safety Officer

Employment Type: Contract

Start Date: Immediate

K&G Engineering and Services is a fast-growing construction and engineering company involved in civil works, petroleum infrastructure, mechanical and electrical installations, and related technical services. The company is committed to maintaining high standards of occupational health, safety, and regulatory compliance across all project sites.

2. Position Purpose

The Safety Officer is responsible for promoting and maintaining a safe and healthy working environment across all construction and operational sites. The role ensures effective implementation of occupational health and safety (OHS) systems, prevention of accidents and occupational illnesses, and compliance with applicable safety legislation and company policies.

3. Reporting Structure

• Reports To: Maintenance and Operations Manager / Projects and Maintenance Engineer
• Works Closely With:
• Site Supervisors and Foremen
• Maintenance and Operations Teams
• Human Resources and Administration
• External Inspectors and Regulatory Authorities

4. Key Duties and Responsibilities

4.1 Occupational Health and Safety Management

• Implement and enforce workplace health and safety procedures in line with company policies and statutory requirements.
• Conduct routine safety inspections, hazard identification, and risk assessments at all sites.
• Ensure proper use, availability, and maintenance of Personal Protective Equipment (PPE).
• Monitor site activities to ensure adherence to safe work practices and construction safety standards.

4.2 Training and Safety Awareness

• Conduct safety inductions for new employees, contractors, and visitors.
• Facilitate regular toolbox talks and refresher safety training sessions.
• Promote a positive safety culture and safe behavior among employees.

4.3 Incident Management and Reporting

• Investigate accidents, incidents, and near-misses and recommend corrective and preventive actions.
• Prepare and submit safety reports, accident investigation reports, and inspection records.
• Maintain accurate safety documentation and registers.

4.4 Compliance, Audits and Monitoring

• Ensure compliance with national occupational health and safety regulations and construction safety requirements.
• Monitor contractors’ and subcontractors’ compliance with safety standards.
• Participate in internal and external safety audits and follow up on corrective actions.

4.5 Emergency Preparedness and Response

• Support the development and implementation of emergency response, fire safety, and evacuation procedures.
• Coordinate basic first aid arrangements and emergency drills at site level.

5. Qualifications, Experience and Knowledge

5.1 Academic and Professional Qualifications

• Diploma in Occupational Health and Safety or a related field.

5.2 Experience

• Minimum of 2–3 years’ relevant work experience in Occupational Health and Safety within construction, engineering, petroleum, manufacturing, or industrial environments.
• Proven hands-on experience in site-based safety management, including:
• Conducting regular site safety inspections and audits
• Performing hazard identification and risk assessments
• Enforcing PPE compliance and safe work procedures
• Delivering safety inductions and toolbox talks
• Practical experience in incident and accident investigation, including:
• Reporting, root cause analysis, and implementation of corrective and preventive actions
• Experience coordinating with:
• Site supervisors and foremen
• Contractors and subcontractors
• Management on safety performance and compliance matters
• Demonstrated ability to work with minimal supervision and make sound safety-related decisions on site.

5.3 Knowledge Requirements

• Good knowledge of occupational health and safety principles, hazard identification, and risk assessment.
• Working knowledge of construction site safety practices, including working at heights, excavation works, lifting operations, and use of machinery and tools.
• Knowledge of accident investigation procedures and incident reporting.
• Understanding of emergency response procedures, fire safety, and first aid principles.
• Familiarity with national workplace safety regulations and industry best practices.

6. Key Competencies

• Strong knowledge of occupational health and safety management systems
• Excellent observation, reporting, and analytical skills
• Good communication and interpersonal skills
• Strong organizational and time-management abilities
• Ability to work independently with minimal supervision
• Firm, fair, and consistent approach to enforcing safety standards

Position: 2. Electrical Technician – Petroleum (Pumps & Tanks)

1. General Information
2. Duty Station: Blantyre, Malawi (with travel to project sites nationwide)
3. Position Title: Electrical Technician – Petroleum (Pumps & Tanks)
4. Employment Type: Contract

Reports To: Projects and Maintenance Engineer / Maintenance & Operations Manager

K&G Engineering and Services is a petroleum-focused engineering company engaged in fuel pump installation and maintenance, tank infrastructure development, electrical and mechanical systems integration, and petroleum-related technical services. The company seeks a qualified Electrical Technician with strong knowledge of petroleum pump systems, tank monitoring systems, and fuel station electrical installations.

2. Position Purpose

The Electrical Technician – Petroleum is responsible for installation, maintenance, troubleshooting, and repair of electrical systems associated with fuel pumps, dispensers, storage tanks, control panels, and related petroleum infrastructure. The role ensures operational reliability, electrical safety compliance, and quality workmanship across all petroleum installations and maintenance projects.

3. Reporting Structure

Reports To:

• Projects and Maintenance Engineer
• Maintenance & Operations Manager

Works Closely With:

• Petroleum General Fitters
• Welding & Fabrication Technicians
• Safety Officer
• Site Supervisors and Client Representatives

4. Key Duties and Responsibilities

4.1 Installation & Commissioning

• Install and wire fuel dispensers, pump motors, control panels, and associated electrical systems.
• Conduct electrical connections for underground and above-ground tank systems.
• Install and configure tank gauging systems, sensors, and monitoring equipment.
• Perform electrical testing and commissioning of pumps and dispensing systems.
• Ensure compliance with approved drawings, schematics, and electrical codes.

4.2 Maintenance & Troubleshooting

• Diagnose and repair electrical faults in fuel pumps, motors, control panels, and monitoring systems.
• Conduct preventive maintenance on electrical components of petroleum infrastructure.
• Troubleshoot issues related to power supply, wiring faults, circuit breakers, relays, and automation systems.
• Inspect earthing and bonding systems to ensure electrical safety compliance.
• Support calibration and optimization of pump performance and tank monitoring systems.

4.3 Tank & Pump Electrical Systems

• Test and verify pump motor performance and electrical load requirements.
• Support leak detection systems and electronic monitoring interfaces.
• Assist in integrating pumps and tank systems with payment and POS systems where applicable.

4.4 Quality Assurance & Compliance

• Ensure all installations and repairs comply with electrical standards and petroleum safety regulations.
• Conduct electrical safety checks before commissioning systems.
• Verify proper cable routing, insulation, and panel organization.
• Maintain detailed service and maintenance documentation.

4.5 Safety & Environmental Compliance

• Adhere strictly to health, safety, and environmental standards in petroleum environments.
• Ensure proper lockout/tagout procedures during maintenance.
• Use appropriate PPE and intrinsically safe tools in hazardous areas.
• Identify and report electrical hazards, fuel leaks, or unsafe conditions immediately.

4.6 Documentation & Reporting

• Record electrical test results, maintenance logs, and repair reports.
• Document spares and components used per job.
• Raise and obtain approval for spares requisitions before withdrawal from stores.
• Provide daily progress reports to supervisors.

5. Qualifications, Experience, and Knowledge

5.1 Academic and Professional Qualifications

• MSCE (Malawi School Certificate of Education)
• Grade 1 Trade Test Certificate in Electrical Installation, Electrical Engineering, or related field
• OR
• Diploma in Electrical Engineering or related discipline

5.2 Experience

• Minimum 5–10 years’ experience in electrical installation and maintenance.
• Proven experience working on fuel pumps, tank systems, and fuel station electrical infrastructure.
• Hands-on experience with pump motors, control panels, sensors, and monitoring systems.
• Experience in hazardous area electrical work is an added advantage.

5.3 Knowledge and Skills

• Strong understanding of pump motor systems and control circuits.
• Knowledge of tank gauging systems and electronic monitoring systems.
• Ability to read and interpret electrical drawings and schematics.
• Knowledge of earthing, bonding, and explosion-proof installations.
• Strong fault-diagnosis and troubleshooting skills.
• Ability to work independently and respond to breakdowns promptly.

6. Key Competencies

• High technical competence in petroleum electrical systems
• Strong analytical and diagnostic skills
• Strong safety awareness in hazardous environments
• Attention to detail and quality workmanship
• Good communication and reporting skills
• Ability to work under pressure and meet deadlines

Position: 3. Electronics Technician – Petroleum (Pump Systems Support)

1. General Information

Recruiting Organization: K&G Engineering and Services

Duty Station: Blantyre, Malawi (with travel to project sites nationwide)

Position Title: Electronics Technician – Petroleum (Pump Systems Support)

Employment Type: Contract

Reports To: Projects and Maintenance Engineer / Maintenance & Operations Manager

K&G Engineering and Services is a petroleum-focused engineering company engaged in fuel pump installation and maintenance, tank infrastructure development, and electrical and mechanical systems integration. The company seeks a qualified Electronics Technician to support petroleum pump systems, working closely with the Pump Technician to ensure reliable and safe fuel station operations.

2. Position Purpose

The Electronics Technician – Petroleum is responsible for installation, configuration, maintenance, and troubleshooting of electronic systems associated with fuel dispensers, pump controllers, automation interfaces, and related petroleum infrastructure.

The role supports the Pump Technician in ensuring accurate pump calibration, system integration, electronic diagnostics, and overall operational efficiency of petroleum dispensing systems.

3. Reporting Structure

Reports To:

• Projects and Maintenance Engineer
• Maintenance & Operations Manager

Works Closely With:

• Pump Technician
• Petroleum General Fitters
• Welding & Fabrication Technicians
• Safety Officer
• Site Supervisors and Client Representatives

4. Key Duties and Responsibilities

4.1 Installation & Commissioning

• Install and configure electronic components of fuel dispensers and pump control systems.
• Connect and program pump interface boards, communication modules, and control units.
• Conduct functional testing and assist in commissioning of fuel dispensing systems.

4.2 Maintenance & Troubleshooting

• Diagnose and repair electronic faults in dispensers, control boards, displays, and sensors.
• Troubleshoot communication failures between pumps, controllers, and monitoring systems.
• Perform preventive maintenance on electronic systems of petroleum infrastructure.
• Support calibration of electronic meters and pump accuracy systems.
• Respond promptly to breakdown calls and support the Pump Technician during field repairs.

4.3 Pump & Tank Electronic Systems

• Monitor and troubleshoot electronic leak detection systems.
• Test and verify pump display units, pulser systems, and data transmission components.
• Assist in upgrading firmware and configuring system parameters where required.
• Support electronic integration of new pumps and tank systems during installations.

4.4 Quality Assurance & Compliance

• Ensure all electronic installations meet petroleum safety standards.
• Verify proper cable management and secure mounting of electronic components.
• Conduct pre-commissioning electronic diagnostics and validation tests.
• Maintain accurate service reports and fault records.

4.5 Safety & Environmental Compliance

• Follow strict safety procedures in hazardous petroleum environments.
• Observe lockout/tagout procedures when working with powered systems.
• Use intrinsically safe tools where required.
• Immediately report unsafe conditions, fuel leaks, or electrical hazards.

4.6 Documentation & Reporting

• Record diagnostics, software configurations, and repair actions taken.
• Document spare parts used and submit requisitions for approvals.
• Provide daily and weekly technical reports to supervisors.
• Maintain accurate maintenance logs for each assigned site.

5. Qualifications, Experience, and Knowledge

5.1 Academic and Professional Qualifications

• MSCE (Malawi School Certificate of Education)
• Grade 1 Trade Test Certificate in Electronics, Electrical & Electronics Engineering, or related field

OR

• Diploma in Electronics Engineering, Mechatronics, or related discipline

5.2 Experience

• Minimum 3–7 years’ experience in electronics installation and maintenance.
• Proven experience working with fuel dispensers, pump electronics, or industrial control systems is an added advantage.
• Experience with automation systems, sensors, and control boards.
• Experience in hazardous area environments is an advantage.

5.3 Knowledge and Skills

• Strong understanding of electronic control boards and pump interface systems.
• Knowledge of tank gauging systems and fuel management systems.
• Ability to read and interpret electronic schematics and wiring diagrams.
• Basic knowledge of networking and communication protocols used in fuel stations.
• Strong diagnostic and troubleshooting skills.
• Ability to work under minimal supervision and collaborate effectively with the Pump Technician.

6. Key Competencies

• High technical competence in pump and tank electronic systems
• Strong analytical and fault-finding skills
• Good teamwork and coordination skills
• Strong safety awareness in hazardous environments
• Attention to detail and accuracy
• Good communication and reporting skills
• Ability to work under pressure and meet deadlines

Position: 4. Welding and Fabrication Workshop Technician (2)

1. General Information

Recruiting Organization: K&G Engineering and Services

Duty Station: Blantyre, Malawi

Position Title: Welding and Fabrication Workshop Technician

Employment Type: Contract

Reports To: Workshop Manager

K&G Engineering and Services is a versatile petroleum and engineering company engaged in fuel pump installation and maintenance, tank and tanker fabrication, pipework, civil works, petroleum infrastructure development, and related mechanical services. The company seeks experienced Welding and Fabrication Workshop Technicians to support precision machining, fabrication, and workshop operations while maintaining high standards of quality, safety, and productivity.

2. Position Purpose

The Welding and Fabrication Workshop Technician is responsible for executing precision machining, welding, fabrication, and mechanical repair works in accordance with technical drawings, job specifications, and company standards. The role ensures quality workmanship, timely completion of workshop jobs, optimal equipment use, and adherence to safety and operational procedures.

3. Reporting Structure

Reports To:

• Workshop Manager

Works Closely With:

• Welders and Fabricators
• Workshop Assistants
• Projects and Maintenance Engineer
• Stores and Procurement Officer

4. Key Duties and Responsibilities

4.1 Workshop Operations and Technical Execution

• Execute fabrication, TIG/MIG/Arc welding, machining, fitting, and mechanical repair works.
• Perform lathe operations, milling, grinding, boring, and turning tasks with precision.
• Conduct fault diagnosis and re-engineering of mechanical components.
• Fabricate and repair fuel tanks, tankers, trailers, heavy vehicles, and workshop machinery components.
• Read and interpret mechanical drawings, blueprints, and technical specifications accurately.
• Ensure all works are executed according to approved job profiles and procedures.

4.2 Quality Control and Inspection

• Inspect completed welded structures and machined parts for dimensional accuracy and structural integrity.
• Ensure compliance with quality standards before job sign-off.
• Identify defects and implement corrective measures promptly.
• Document inspection results and repair reports.

4.3 Workshop Planning and Workflow Support

• Support job allocation and ensure timely completion of assigned tasks.
• Assist in planning workloads and meeting delivery timelines.
• Participate in technical evaluation of customer requirements and quotations.
• Ensure proper handover of incomplete tasks at the end of shifts.

4.4 Tools, Equipment, and Asset Management

• Maintain workshop machines and tools in proper working condition.
• Ensure calibration and operational integrity of machine tools (lathe, milling, grinding machines).
• Use appropriate tools and equipment for each job to prevent damage and ensure safety.
• Raise and obtain approval for spares requisition before drawing items from stores.

4.5 Safety, Compliance, and Housekeeping

• Adhere to all health, safety, and environmental regulations.
• Maintain a clean, organized, and hazard-free workshop environment.
• Use appropriate Personal Protective Equipment (PPE) at all times.
• Report unsafe conditions, incidents, or equipment faults immediately.

4.6 Documentation and Reporting

• Record material usage, spares consumed, and time spent per job.
• Document repair procedures and completed tasks accurately.
• Provide regular updates to the Workshop Manager on job progress.
• Maintain proper job tracking records.

5. Qualifications, Experience, and Knowledge

5.1 Academic and Professional Qualifications

• Malawi School Certificate of Education (MSCE)
• Welding and Fabrication Grade 1 (NTTC) with TEVETA certification
• OR
• Diploma in Mechanical Engineering or related technical field

5.2 Experience

• Minimum 10 years’ experience in a mechanical workshop environment.
• At least 5 years’ hands-on experience in welding heavy vehicles, tanks, tankers, trailers, or machinery.
• Experience in fuel tank or fuel tanker fabrication is an added advantage.

5.3 Knowledge and Skills

• Strong knowledge of machine tools (lathe, milling, boring, grinding).
• Proficiency in TIG, MIG, and Arc welding techniques.
• Understanding of material properties (steel, cast iron, aluminum).
• Ability to read and interpret technical drawings.
• Knowledge of workshop safety standards and maintenance practices.
• Strong problem-solving and analytical skills.
• Ability to work with minimal supervision.

6. Key Competencies

• High level of technical precision and attention to detail
• Strong workshop discipline and time management
• Ability to work under pressure and meet deadlines
• Good communication and reporting skills
• Integrity, reliability, and accountability
• Teamwork and collaboration

Position: 5. Foreman

1. General Information

Recruiting Organization: K&G Engineering and Services

Duty Station: Chileka, Blantyre, Malawi (with travel to project sites)

Position Title: Foreman

Employment Type: Contract

K&G Engineering and Services is a fast-growing construction and engineering company involved in civil works, petroleum infrastructure, mechanical and electrical installations, and related technical services. The company seeks a competent and experienced Foreman to supervise and coordinate site activities, ensuring quality workmanship, adherence to drawings, and timely project completion.

2. Position Purpose

The Foreman is responsible for supervising construction works on site, coordinating labor and materials, ensuring compliance with technical drawings and specifications, and maintaining quality, safety, and productivity standards. The role bridges management and site workers, ensuring efficient execution of assigned projects.

3. Reporting Structure

Reports To:

• Maintenance and Operations Manager
• Projects and Maintenance Engineer

Works Closely With:

• Site Engineers
• Safety Officer
• Skilled and semi-skilled workers
• Subcontractors and suppliers

4. Key Duties and Responsibilities

4.1 Site Supervision and Coordination

• Supervise and coordinate daily site activities and workforce.
• Allocate tasks to workers and ensure work is executed according to drawings and specifications.
• Interpret and read technical drawings accurately for proper implementation.
• Monitor workmanship to ensure quality standards are maintained.
• Ensure projects are completed within specified timelines.

4.2 Technical Execution

• Oversee construction activities including masonry, concrete works, structural works, finishing works, and general building tasks.
• Ensure correct measurements, alignment, and levels in accordance with drawings.
• Monitor use of materials to minimize wastage and control costs.
• Identify and resolve minor technical issues on site before escalation.

4.3 Labor and Resource Management

• Supervise skilled and semi-skilled laborers.
• Monitor attendance, productivity, and discipline of site workers.
• Ensure tools and equipment are used properly and maintained.
• Coordinate delivery and storage of materials on site.

4.4 Health and Safety Compliance

• Enforce site safety procedures and ensure compliance with company safety standards.
• Ensure workers use appropriate Personal Protective Equipment (PPE).
• Support the Safety Officer in implementing safe work practices.
• Report hazards, unsafe acts, and incidents promptly.

4.5 Reporting and Documentation

• Provide daily progress updates to management.
• Record material usage and site activities.
• Report any delays, defects, or technical concerns to supervisors.
• Assist in preparation of site reports when required.

5. Qualifications, Experience and Knowledge

5.1 Academic and Professional Qualifications

• Grade 2 Trade Certificate in Foremanship and Building or equivalent qualification.

5.2 Experience

• Minimum 5 years’ experience working in an engineering or construction company.
• At least 10 years of hands-on building and construction experience.
• Proven experience supervising site teams and managing construction works.
• Demonstrated ability to read and interpret technical drawings accurately.

5.3 Knowledge Requirements

• Strong knowledge of building construction methods and materials.
• Understanding of site measurement, levelling, and alignment techniques.
• Knowledge of construction safety practices.
• Ability to manage labor and maintain discipline on site.

5.4 Key Competencies

• Strong leadership and supervisory skills
• Ability to read and interpret drawings
• Good organizational and time-management skills
• Problem-solving and decision-making ability
• Good communication skills
• Ability to work under pressure and meet deadlines
• Practical, hands-on approach to work

Position: 6. Light Cargo Vehicle Driver

1. General Information

Recruiting Organization: K&G Engineering and Services

Duty Station: Blantyre, Malawi (with deployment to project sites nationwide)

Position Title: Light Cargo Vehicle Driver

Employment Type: Contract

Reports To: Site Foreman / Projects and Maintenance Engineer

Organization Overview:

K&G Engineering and Services operates in civil construction, petroleum infrastructure development, tank installations, pipework, pump island construction, and related engineering services. The company requires competent Light Cargo Vehicle Drivers to ensure safe, timely, and efficient transport of personnel, materials, and equipment in support of project execution.

2. Position Purpose

The Light Cargo Vehicle Driver is responsible for safely operating company vehicles to transport personnel, tools, materials, and equipment to and from project sites. The role ensures vehicles are maintained in good condition, operated responsibly, and driven in compliance with road safety and organizational standards.

3. Reporting Structure

Reports To:

• Maintenance and Operations Manager
• Projects and Maintenance Engineer

Works Closely With:

• Project Teams and Site Supervisors
• Mechanical and Electrical Technicians
• Safety Officer
• Logistics and Procurement Teams

4. Key Duties and Responsibilities

4.1 Vehicle Operation

• Safely drive company light cargo vehicles (pickup trucks, vans, and staff cars).
• Transport personnel, equipment, and materials to project sites on schedule.
• Plan routes efficiently to avoid delays and minimize travel risks.
• Ensure safe loading and unloading of materials.
• Assist in minor vehicle-related tasks during project operations, such as moving light equipment.

4.2 Vehicle Inspection & Maintenance

• Conduct pre-trip inspections, including brakes, lights, tyres, fuel, and engine oil.
• Report mechanical faults or damages immediately.
• Maintain cleanliness and hygiene of vehicles.
• Record mileage, fuel consumption, and maintenance logs accurately.
• Coordinate with the workshop for scheduled maintenance or servicing.

4.3 Safety & Compliance

• Comply with all traffic laws and road safety regulations.
• Drive cautiously around active project sites, especially near fuel tanks and machinery.
• Use seatbelts and ensure all passengers adhere to safety protocols.
• Avoid overloading or misusing company vehicles.
• Immediately report any accidents, near misses, or unsafe conditions.

4.4 Site Coordination

• Coordinate with site teams to ensure timely pick-up and drop-off of personnel and materials.
• Support operations by assisting with minor site tasks when required (e.g., guiding vehicles, assisting in deliveries).
• Minimize disruption to ongoing fuel station or construction operations.

4.5 Documentation & Reporting

• Maintain daily vehicle logbooks, including mileage, fuel usage, and destinations.
• Report vehicle-related incidents or breakdowns promptly.
• Assist in vehicle handover documentation between shifts.

5. Qualifications & Experience

5.1 Minimum Requirements

• MSCE (Malawi School Certificate of Education) or equivalent.
• Valid Malawi Driver’s License for Vehicles (Class C1 or equivalent).
• Defensive driving or professional driving training is an added advantage.

5.2 Experience

• Minimum 5 – 8 years’ experience driving 5 tons vehicles in a professional or construction environment.
• Experience in transporting personnel and materials to active project sites is preferred.
• Familiarity with Malawi road networks and project site protocols is an advantage.

6. Required Skills & Competencies

• Safe and responsible driving skills
• Knowledge of basic vehicle maintenance
• Good navigation and route planning
• Punctuality and time management
• Good communication and teamwork skills
• High level of responsibility, alertness, and situational awareness.

Application Process

Interested and qualified candidates should submit their application letter, detailed CV, copies of certificates, and three traceable referees to:

Projects and Maintenance Engineer

K&G Engineering and Services

P/Bag 37

Lilongwe, Malawi

Email: vacancies@kgeasmw.site

Subject Line:

Safety Officer,

Electrical Technician – Petroleum (Pumps & Tanks),

Electronics Technician – Petroleum (Pump Systems Support),

Welding and Fabrication Workshop Technician

Foreman

Light Cargo Vehicle Driver

Closing Date for All Applications: 13th March 2026

K&G Engineering and Services is an equal opportunity employer. We strongly encourage qualified women to apply. Only shortlisted candidates will be contacted.